We recommend saving as a .PDF
You may also send the file in the following types: jpg, jpeg, psd, tif, tiff, eps, ai, and png

We prefer that you send .PDF and .EPS files with outlined fonts. These files are easier to handle and will likely speed up your turn-around. Remember to add crop marks and flatten your files before uploading.

If you send us an RGB file, there is a chance that a color shift may occur and you may not be satisfied with your job.  You should always start and finish your designs in CMYK color mode

 

3. What resolution should my file be?

Low resolution files may be printed as is or will be placed on hold until we receive new files, slowing your turn-around.

To the left is a 72 dpi low res image. To the right is the same image but at 300 dpi.  We only accept 300 dpi files and no less.

 

Bleed must extend further than the cut line. Please add 1/8 inch grip space.  For example a 3.5x2 business card with a bleed would be set up as 3.625x2.125.  Please keep all text and anything you do not want cut at least .125" away from the cut line.

We cut through many sheets at a time, so watch your borders to avoid an unwanted mistake.